View 2SC3315_343861.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistor
2SC3315
Silicon NPN epitaxial planer type
For high-frequency amplification
Unit: mm
4.00.2 2.00.2
q q q q
s Absolute Maximum Ratings
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current Collector power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC PC Tj Tstg
(Ta=25C)
Ratings 30 20 3 15 300 150 -55 ~ +150 Unit V V V mA mW C C
0.45+0.20 -0.10 (2.5) (2.5) 0.45+0.20 -0.10 0.70.1
1
15.60.5
Optimum for high-density mounting. Allowing supply with the radial taping. Optimum for RF amplification of FM/AM radios. High transition frequency fT.
2
3
1:Emitter 2:Collector 3:Base
(0.8)
0.75 max.
7.6
s Features
(0.8) 3.00.2
NS-B1 Package
s Electrical Characteristics
Parameter Collector to base voltage Emitter to base voltage Forward current transfer ratio Base to emitter voltage Common emitter reverse transfer capacitance Transition frequency Noise figure Power gain
(Ta=25C)
Symbol VCBO VEBO hFE Cre fT NF PG
*
Conditions IC = 10A, IE = 0 IE = 10A, IC = 0 VCB = 6V, IE = -1mA VCB = 6V, IE = -1mA VCE = 6V, IC = 1mA, f = 10.7MHz VCB = 6V, IE = -1mA, f = 200MHz VCB = 6V, IE = -1mA, f = 100MHz VCB = 6V, IE = -1mA, f = 100MHz
min 30 3 65
typ
max
Unit V V
260 720 0.8 1.0 mV pF MHz 5.0 dB dB
VBE
450
650 3.3
20
24
*h
FE
Rank classification
C 65 ~ 160 D 100 ~ 260 hFE
Rank
396
Transistor
PC -- Ta
500 240 Ta=25C 200 25 25C Ta=75C 20
2SC3315
IC -- VCE
30 VCE=6V
IC -- VBE
Collector power dissipation PC (mW)
Collector current IC (mA)
160 IB=100A 120 80A 60A 40A 40 20A
300
Collector current IC (mA)
400
-25C
15
200
80
10
100
5
0 0 20 40 60 80 100 120 140 160
0 0 2 4 6 8 10 12
0 0 0.4 0.8 1.2 1.6 2.0
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base to emitter voltage VBE (V)
VCE(sat) -- IC
Collector to emitter saturation voltage VCE(sat) (V)
100 30 10 3 1 0.3 25C 0.1 -25C 0.03 0.01 0.1 IC/IB=10 300
hFE -- IC
VCE=6V 1600 1400 1200 1000
fT -- I E
Forward current transfer ratio hFE
250
200 Ta=75C 25C 100 -25C
Transition frequency fT (MHz)
VCE=10V 800 6V 600 400 200
150
Ta=75C
50
0.3
1
3
10
30
100
0 0.1
0.3
1
3
10
30
100
0 - 0.1 - 0.3
-1
-3
-10
-30
-100
Collector current IC (mA)
Collector current IC (mA)
Emitter current IE (mA)
Cob -- VCB
Common emitter reverse transfer capacitance Cre (pF)
2.5 2.4
Cre -- VCE
IE=0 f=1MHz Ta=25C IC=1mA f=10.7MHz Ta=25C 30 f=100MHz Rg=50 Ta=25C
PG -- IE
VCE=10V 6V
Collector output capacitance Cob (pF)
2.0
2.0
25
1.6
Power gain PG (dB)
0.3 1 3 10 30 100
20
1.5
1.2
15
1.0
0.8
10
0.5
0.4
5
0 1 3 10 30 100
0 0.1
0 0.1
0.3
1
3
10
30
100
Collector to base voltage VCB (V)
Collector to emitter voltage VCE (V)
Emitter current IE (mA)
397
Transistor
NF -- IE
12 f=100MHz Rg=50k Ta=25C
2SC3315
10
Noise figure NF (dB)
8
6
4
2
0 0.1
0.3
1
3
10
30
100
Emitter current IE (mA)
398
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SC3315

	To Download 2SC3315 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .